Danfoss VLT Midi Drive FC 280 설치 지침 - 페이지 2
{카테고리_이름} Danfoss VLT Midi Drive FC 280에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT Midi Drive FC 280 4 페이지. Fan replacement
Danfoss VLT Midi Drive FC 280에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지)
페이지 인쇄
Installation Instructions
Installation
Enclosure Sizes K1, K2, and K4
1.
Grab the center handle on the fan and use a flat-
edged screwdriver to release the retaining lever.
Illustration 1.1 Removing Fan on Enclosure Sizes K1, K2, and K4
2.
Unplug the fan cable.
Illustration 1.2 Fan Cable Plug. Plug Location Depends on Fan
Type.
2
Fan Replacement
®
VLT
Midi Drive FC 280
NOTICE
For VLT
3.
Enclosure Size K3
1.
Illustration 1.3 Removing Fan Screw on Enclosure Size K3
2.
Illustration 1.4 Pulling out Fan on Enclosure Size K3
Danfoss A/S © 11/2015 All rights reserved.
®
Midi Drive FC 280, the fan cable has 3 wires.
Connect the new fan cable and click the new fan
into place.
Remove the M3x6 screw in the bottom right corner.
Press the levers on each side of the fan and pull the
fan outwards.
MI07D102