AudioControl BVR-10 Installation And Operation Manual - Page 12

Browse online or download pdf Installation And Operation Manual for Receiver AudioControl BVR-10. AudioControl BVR-10 20 pages. Cat-5 balanced video/audio driver cat-5 balanced video/audio receiver active-balanced series

Print Page

CTIVE

"No Picture or Sound."

1.Make certain the BVD-10 and BVR-10 both show

power lights.

2.Verify that the Cat-5 cable is properly terminated on

both ends.

3.Verify the signal connection cables.

4.Make certain the Cat-5 cable run does NOT go through

an Ethernet Router or hub. It is alright to run the signal

through a passive patch bay.

"No Power Light."

1.Make certain the two wires from the power supply are

connected to the 24 VAC connections on the terminal

block. Do not connect the external power supply to the

Ground terminal on the 3 pin connector block. This is

for shielding purposes only.

2.Double-check that the power supply is plugged in and

that the outlet has power.

"The video picture is dark."

1.Turn up the Video Gain adjustment on the BVR-10.

-B

ALANCED