AudioControl BVR-10 설치 및 운영 매뉴얼 - 페이지 12

{카테고리_이름} AudioControl BVR-10에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioControl BVR-10 20 페이지. Cat-5 balanced video/audio driver cat-5 balanced video/audio receiver active-balanced series

페이지 인쇄

CTIVE

"No Picture or Sound."

1.Make certain the BVD-10 and BVR-10 both show

power lights.

2.Verify that the Cat-5 cable is properly terminated on

both ends.

3.Verify the signal connection cables.

4.Make certain the Cat-5 cable run does NOT go through

an Ethernet Router or hub. It is alright to run the signal

through a passive patch bay.

"No Power Light."

1.Make certain the two wires from the power supply are

connected to the 24 VAC connections on the terminal

block. Do not connect the external power supply to the

Ground terminal on the 3 pin connector block. This is

for shielding purposes only.

2.Double-check that the power supply is plugged in and

that the outlet has power.

"The video picture is dark."

1.Turn up the Video Gain adjustment on the BVR-10.

-B

ALANCED