Freedom Air 2.0 Operation Instruction

Browse online or download pdf Operation Instruction for Water Pump Freedom Air 2.0. Freedom Air 2.0 3 pages. Dual remote wireless interchangeable inflator pump

Print Page

Freedom-Air 2.0 Dual Remote Wireless Interchangeable Inflator Pump

SST

Memory 1

Left

Pressure Scroll Bar

Memory 1

SOFT

Operation Instruction:

1. Plug in the pump, the power indicator will flash slowly for 30 seconds and then stops flashing which

means the system is in standby mode. (Within 30 seconds, press any button to light LCD, then pressing

"FIRM" button for 3 seconds will start to resync. LCD will display "SU" when the pump and remote are

synced again successfully and enter the standby mode. The power indicator will flash when the pump is

working.

2. Press any button to light LCD for operation. If there is no operation after 15 seconds LCD will turn off

automatically to save battery life.

3. LEFT/RIGHT: press "LEFT/RIGHT" button to select left side or right side air chamber for further operation.

LCD will show "L" or "R" accordingly.

4. FIRM: press "FIRM" button for one time, the pump will be activated to inflate and the pressure level

shown on LCD will increase relative to pressure in air chamber, and scroll bar will scroll up to show that

the pressure is increasing. At any time during the period of inflation, pressing any button will stop the

inflation. Or when the pressure reaches the maximum ("50" on LCD), the inflation will stop automatically.

5. SOFT: press "SOFT" button, the pump will be activated to deflate and the pressure level shown on LCD

Operation Instruction

Low Battery Capacity

Memory 2

Right

Pressure Level

FIRM

Memory 2

LEFT/RIGHT