Freedom Air 2.0 Istruzioni per il funzionamento
Sfoglia online o scarica il pdf Istruzioni per il funzionamento per Pompa dell'acqua Freedom Air 2.0. Freedom Air 2.0 3. Dual remote wireless interchangeable inflator pump
Stampa la paginaFreedom-Air 2.0 Dual Remote Wireless Interchangeable Inflator Pump
SST
Memory 1
Left
Pressure Scroll Bar
Memory 1
SOFT
Operation Instruction:
1. Plug in the pump, the power indicator will flash slowly for 30 seconds and then stops flashing which
means the system is in standby mode. (Within 30 seconds, press any button to light LCD, then pressing
"FIRM" button for 3 seconds will start to resync. LCD will display "SU" when the pump and remote are
synced again successfully and enter the standby mode. The power indicator will flash when the pump is
working.
2. Press any button to light LCD for operation. If there is no operation after 15 seconds LCD will turn off
automatically to save battery life.
3. LEFT/RIGHT: press "LEFT/RIGHT" button to select left side or right side air chamber for further operation.
LCD will show "L" or "R" accordingly.
4. FIRM: press "FIRM" button for one time, the pump will be activated to inflate and the pressure level
shown on LCD will increase relative to pressure in air chamber, and scroll bar will scroll up to show that
the pressure is increasing. At any time during the period of inflation, pressing any button will stop the
inflation. Or when the pressure reaches the maximum ("50" on LCD), the inflation will stop automatically.
5. SOFT: press "SOFT" button, the pump will be activated to deflate and the pressure level shown on LCD
Operation Instruction
Low Battery Capacity
Memory 2
Right
Pressure Level
FIRM
Memory 2
LEFT/RIGHT