AudioEngine A2+ Setup Manual - Page 5

Browse online or download pdf Setup Manual for Speakers AudioEngine A2+. AudioEngine A2+ 11 pages. Premium powered desktop speakers
Also for AudioEngine A2+: Setup Manual (11 pages), Setup Manual (11 pages)

Print Page

USER INSTALLATION

Antenna Setup-4) Strength Bar

When you want to change the setting in each

item, you will get the locked signal condition

by the color and the height of Signal Bar at

the right side, after changing the setting of

the items. Yellow means being locked, Gray

means being unlocked, and the height

means the strength and quality of the signal..

Channel Search-1)DiSEqC 1.2

1) Antenna : Select your antenna number.

2 ) S a t e l l i t e : T h e s a t e l l i t e h e r e i s

determined by the selected number in above

Antenna item.

You can see the information of selected

satellite in the right side.

Edit Mode : If you want to edit those

preprogrammed data such as Transponder,

Frequency, Symbol Rate, Polarization and

22 KHz, please press Edit mode key (Red

color key) on the RCU. And then you can

move into those columns to change the

value.

3) Position : After selecting a satellite,

please select Position button and then keep

pressing

selected satellite is locked. If the satellite is

locked correctly, the color of signal label bar

will be changed to yellow.

When you press OK key on the RCU, the

message of

"Would you like to set the

value of current positioner?" will be

displayed for your confirmation.

Antenna Setup-3) Strength Bar

key on the RCU until

Channel Search-1)DiSEqC 1.2