AudioEngine A2+ Setup Manual - Page 7

Browse online or download pdf Setup Manual for Speakers AudioEngine A2+. AudioEngine A2+ 11 pages. Premium powered desktop speakers
Also for AudioEngine A2+: Setup Manual (11 pages), Setup Manual (11 pages)

AudioEngine A2+ Setup Manual
USER INSTALLATION
USER INSTALLATION
System Setting
3) LNB power : If your receiver is connected to a LNB, select YES. However if your
receiver is connected to another receiver through Loop Through support, you should
check which receiver is connected directly to the LNB. In case it is the other receiver,
select OFF.
4) VIDEO FORMAT : Select the desired
v i d e o f o r m a t a m o n g L E T T E R B O X ,
PAN_SCAN, COMBINED, IGNORE.
5) Screen Format : If your TV supports the
16:9 screen format and if the selected
channel provides 16:9 format programs,
please select 16:9.
6) Video output : If your SCART supports
RGB control, select RGB. Otherwise select
CVBS.
7) TV type : Select the type according to
your TV type.
8) Transparent Rate Adjustment:
Transparent Rate is used to adjust the
t r a n s p a r e n c e l e v e l o f a l l t h e m e n u s
a p p e a r i n g o n t h e s c r e e n f r o m m o s t
transparent (value = 1) to opacity (value = 15).
9) Start On Channel : Press the OK key, to display the channel list and select the
channel that you want to start whenever you switch on the receiver.
10) UHF Standard : Select UHF type.
11) UHF Channel : Select the desired UHF channel for satellite mode.
Note : In countries where UHF is not used options 10) and 11) are needless and may
be deleted.
System Setting
17