AUDIOLINE PMR 500 User Manual - Page 5

Browse online or download pdf User Manual for Two-Way Radio AUDIOLINE PMR 500. AUDIOLINE PMR 500 10 pages. 2-way uhf cb radio
Also for AUDIOLINE PMR 500: Manual (9 pages), User Manual (9 pages)

AUDIOLINE PMR 500 User Manual

CONNECTION

Install 4 x AAA, 1.5v, good quality Alkaline batteries (not supplied) observing correct
polarity.

SWITCHING UNIT ON/OFF

# With unit in OFF mode (ie no legends in display).
# Press and hold the
# A confirmation tone is heard, and the display will show all of the display segments for
4 seconds.
# The unit is now in the standby mode and ready to use. The display will show the
selected channel.
# Press and hold the

CHANNEL SELECTION

# There are 8 channels available for selection.
# The operating channel can be changed by pressing the CHAN
# The display will show the channel numbers (1-8) as you scroll through.

TO TALK/TRANSMIT TO ANOTHER PMR500

# Ensure the units are in stand-by and have selected the same channels (see above).
# Push and hold the TALK button on one unit, speak clearly towards the unit's
microphone.
# Once you have finished talking, release the TALK button. A confirmation tone will
be heard.
# You are now ready to receive an incoming signal/reply. If the other person doesn't
answer, press CALL button to make the other unit ring once.

KEY LOCK

The buttons can be locked to prevent accidental operation of the buttons.
# During stand-by, press and hold both the VOL
A beep will be heard and the key lock icon will be displayed.
# To release the Key Lock, press and hold both the VOL
second. A beep will be heard.
button for 2 seconds.
button for 2 seconds if you wish to turn off the unit.
AUDIOLINE PMR500
or CHAN
and VOL
buttons for 1 second.
and VOL
button.
buttons for 1
3