AUDIOLINE PMR 500 User Manual - Page 6

Browse online or download pdf User Manual for Two-Way Radio AUDIOLINE PMR 500. AUDIOLINE PMR 500 10 pages. 2-way uhf cb radio
Also for AUDIOLINE PMR 500: Manual (9 pages), User Manual (9 pages)

Print Page

AUDIOLINE PMR500

VOLUME CONTROL

# The audiable volume can be adjusted by pressing the VOL

•

–

and VOL

buttons.

# You can select between a low (1) or high (8) volume setting. Display will show

current setting.

STANDBY MODE

If the PMR500 unit does not receive, transmit or no button has been pressed for more

than 10 seconds, the unit will return to stand-by mode. The STANDBY icon will begin

to flash.

Any button press, or incoming signal will switch the unit on.

MANUAL RECEVING MODE

Normally when another PMR 500 calls you, the receiving mode is activated automatically

and the conversation will be heard. If this doesn't work you can activate the receiving

mode manually by pressing the

button for 5 seconds until a beep is heard. Press

again shortly to return to stand-by.

BACKLIT ON/OFF

Press the

button shortly to toggle backlit on/off. In stand-by the light is off.

BATTERY LOW

The symbol

will flash when the battery level is below operational limits.

ACCESORIES

Headset, carry bag and batteries can be purchased separately from your dealer.

DISTANCE

The maximum distance is depending on many factors in the ambient interior. The

radiowave that transfer the call meets many obstacles in the way. The obstacles can have

a reduce effect for the radiowave. The given distance assume that there is nothing

between the units. During those conditions the range can be up to XXX meters. Inside

houses etc the distance will be limited depending on walls, floor, etc.