Consumer Physics SCiO Cup Quick Reference Manual - Page 2

Browse online or download pdf Quick Reference Manual for Measuring Instruments Consumer Physics SCiO Cup. Consumer Physics SCiO Cup 4 pages.

Print Page
Consumer Physics SCiO Cup Quick Reference Manual
Sampling
Remove SCiO Cup cover and put it
aside.
Make sure the dome is clean.
Remove small particles if needed
Sample Temperature
The sample temperature should be within the supported ranges below:
<38°F
<3.3°C
Best Practices
• Make sure the dome is covered with Silage. Silage surface should align with the edge of cup
• Use the lid when scanning under direct sunlight
• Make sure the cup is clean before and after each scan
• It is recommended to hold the device steady or to place it on a stable surface while scanning
• Storage instructions: Please make sure the cup is stored in its case to prevent exposure of the sensor to
direct sunlight for long periods of time
SCiO Cup QUICK REFERENCE GUIDE
Turn on SCiO Cup by pressing the
function button for 2 seconds
38°F - 50℉
51℉ - 70℉
11°C – 20°C
3.3°C - 10°C
Acceptable
(38°F – 100°F)
)
3.3°C - 38°C)
71℉ - 100℉
21°C - 38°C
Ideal
Fill the SCiO Cup with silage up to the
cup edge
>100℉
>38°C
V1.3