Consumer Physics SCiO Cup Snelle referentiehandleiding - Pagina 2

Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} Consumer Physics SCiO Cup. Consumer Physics SCiO Cup 4 pagina's.

Sampling

Remove SCiO Cup cover and put it

aside.

Make sure the dome is clean.

Remove small particles if needed

Sample Temperature

The sample temperature should be within the supported ranges below:

<38°F

<3.3°C

Best Practices

• Make sure the dome is covered with Silage. Silage surface should align with the edge of cup

• Use the lid when scanning under direct sunlight

• Make sure the cup is clean before and after each scan

• It is recommended to hold the device steady or to place it on a stable surface while scanning

• Storage instructions: Please make sure the cup is stored in its case to prevent exposure of the sensor to

direct sunlight for long periods of time

SCiO Cup QUICK REFERENCE GUIDE

Turn on SCiO Cup by pressing the

function button for 2 seconds

38°F - 50℉

51℉ - 70℉

11°C – 20°C

3.3°C - 10°C

Acceptable

(38°F – 100°F)

)

3.3°C - 38°C)

71℉ - 100℉

21°C - 38°C

Ideal

Fill the SCiO Cup with silage up to the

cup edge

>100℉

>38°C

V1.3