Contacta STS-K002L Installation & User Manual - Page 5
Browse online or download pdf Installation & User Manual for Intercom System Contacta STS-K002L. Contacta STS-K002L 16 pages. Window intercom system
Installation Instructions
We recommend that installation is carried out by a qualified engineer,
adhering to relevant standards.
Check the contents of the box to familiarise yourself with the components.
Staff Counter Side
Recommended Tools
A toolkit recommended to install the system will include:
•
Screwdrivers (Flat or Blade 2.5mm
and Phillips Head PH2)
•
Battery or Mains Drill
•
Drillbits: 2mm, 3mm, 5mm and 7mm
•
Allen Key Set
•
Cable Tacking Gun (10mm)
•
Wire Cutters/Strippers
Trim cables if necessary (excluding the power supply)
to the required length to connect to the back of the
amplifier. Bare approximately 6mm of the cable ends to
connect to the 2 pin plugs.
Surface Mounted Speaker
and Microphone
Staff Pod
Customer / Visitor
Counter Side
•
Pliers
•
Tape Measure
•
Pencil or Marker Pen
•
Torch
•
Cable Ties
•
Electrical Insulation Tape
•
Trunking
Negative -
or screened cable
Positive +
5