Contacta STS-K002L Installatie- en gebruikershandleiding - Pagina 5

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Contacta STS-K002L. Contacta STS-K002L 16 pagina's. Window intercom system

Pagina afdrukken

Installation Instructions

We recommend that installation is carried out by a qualified engineer,

adhering to relevant standards.

Check the contents of the box to familiarise yourself with the components.

Staff Counter Side

Recommended Tools

A toolkit recommended to install the system will include:

•

Screwdrivers (Flat or Blade 2.5mm

and Phillips Head PH2)

•

Battery or Mains Drill

•

Drillbits: 2mm, 3mm, 5mm and 7mm

•

Allen Key Set

•

Cable Tacking Gun (10mm)

•

Wire Cutters/Strippers

Trim cables if necessary (excluding the power supply)

to the required length to connect to the back of the

amplifier. Bare approximately 6mm of the cable ends to

connect to the 2 pin plugs.

Surface Mounted Speaker

and Microphone

Staff Pod

Customer / Visitor

Counter Side

•

Pliers

•

Tape Measure

•

Pencil or Marker Pen

•

Torch

•

Cable Ties

•

Electrical Insulation Tape

•

Trunking

Negative -

or screened cable

Positive +