Contacta Limited Portable InfoLoop Operating Instructions

Browse online or download pdf Operating Instructions for Hearing Aid Contacta Limited Portable InfoLoop. Contacta Limited Portable InfoLoop 2 pages.

Print Page

Setting up

Place portable InfoLoop™ Unit on the

desk or counter top between the

hearing aid wearer and the member

of staff so that:



Rear of unit, with in-built microphone,

Faces staff



Front of unit, with 'T' position label,

Faces hearing aid wearer

Switching 'ON'

Slide the switch on the left hand side of

the rear of the Portable InfoLoop™ Unit

to the 'ON' position. See below:

If LED flashes red:



Battery is low and requires charging

Portable InfoLoop

To Charge



Plug in power supply unit



Connect flexible lead socket marked 'PWR' on the rear of

the portable InfoLoop™ Unit



Unit may be charged while the system is in operation



When charging, the LED will illuminate constant red

Note: The unit will operate approximately 8 hours on fully charged batteries

™