Contacta Limited Portable InfoLoop Operating Instructions - Page 2

Browse online or download pdf Operating Instructions for Hearing Aid Contacta Limited Portable InfoLoop. Contacta Limited Portable InfoLoop 2 pages.

Print Page
Using the system
During normal operation the LED will flash
green when conversation is taking place.
This indicates that the system is working.
If hearing aid user does not pick
Up clear signal:
Adjust position of portable
InfoLoop™ Unit on desk or counter
to achieve optimum performance
for hearing aid user
Draw hearing aid user's attention to
the induction loop sign, to check their
device is in the 'T' position
Ask the hearing aid user to check the
volume setting no their device
Using External
Boundary Microphone
If a number of people are speaking
together
Insert microphone plug into socket
marked 'EXT' on rear of Portable
InfoLoop™ Unit
Position microphone on desk top in
front of those speaking
If several people are speaking together,
for example in a round table discussion,
place the external microphone in a
central position.
Contacta, Inc.
332 E. Lakewood Blvd.
Holland, MI 49424
Phone (616) 392-3400
Technical support
Contacta offers comprehensive technical
support for all its systems, including:
Advice via telephone
helpline, fax or email
On-site visit by a Contacta
field service engineer
Detailed installation and service
manuals supplied with every system
Customers have access to continuous
help and support, technical or administrative,
through the Contacta helpline.
Contacta Inc Helpline
Email
Telephone: (616) 392-3400
General
recommendations
Put Portable InfoLoop™ Unit on charge
after each Use, so that it is fully charged
and ready for the Next occasion.
alternatively plug the charger in
at all times if the unit is to be used on
a semi-Permanent basis.
If not used regularly, the unit should be
left on charge constantly so that it is
ready when needed.