Duratech DURAPRO-12 Manual - Page 7
Browse online or download pdf Manual for Heat Pump Duratech DURAPRO-12. Duratech DURAPRO-12 14 pages.
Print Page
4.2 Button functions
1. ON/OFF
With the ON/OFF button, the heatpump is turned ON or OFF (stand-by status)
2. LOCK SCREEN
Press this button to lock the screen
To unlock: press the lock button and enter the code "22"
3. PARAMETERS
N/A
4. CLOCK SETTINGS
In the main interface, tap on the clock Settings button 3, interface displays as follows:
Setting the time
tap on the Time Settings button (1), then the following menu pops up:
Tap the value to set time directly, the tap the Enter button to save the Settings.
For example: setup time: the 02-25-2016 15:00:00, input 15 00 00 02 25 16
Note:
if the input format is not correct, the setting can not be saved by tapping Enter.
12
Setting/activating the Timers
Tap the TIMER set button (2), to enter the timer menu
NO
Name
Button color
Activated: Green
1
TIMER START
Not activated: Grey
2
Start time
Activated: Red
3
TIMER END
Not activated: Grey
4
End time
For example above: without action, 00:00 o 'clock and 01:00 o 'clock
will be the on and off time of timing settings.
5. ERROR CODES
See section 4.3
6. SILENT SETTINGS
In the main screen, tap the silent settings button
A pop-up appears with 2 icons:
Button function
Tap this button to activate/deactivate
the START timer
Set Start time
Tap this button to activate/deactivate
the END timer
Set End time
13