Duratech DURAPRO-12 Manual - Página 7

Procurar online ou descarregar pdf Manual para Bomba de calor Duratech DURAPRO-12. Duratech DURAPRO-12 14 páginas.

4.2 Button functions

1. ON/OFF

With the ON/OFF button, the heatpump is turned ON or OFF (stand-by status)

2. LOCK SCREEN

Press this button to lock the screen

To unlock: press the lock button and enter the code "22"

3. PARAMETERS

N/A

4. CLOCK SETTINGS

In the main interface, tap on the clock Settings button 3, interface displays as follows:

Setting the time

tap on the Time Settings button (1), then the following menu pops up:

Tap the value to set time directly, the tap the Enter button to save the Settings.

For example: setup time: the 02-25-2016 15:00:00, input 15 00 00 02 25 16

Note:

if the input format is not correct, the setting can not be saved by tapping Enter.

Setting/activating the Timers

Tap the TIMER set button (2), to enter the timer menu

Name

Button color

Activated: Green

TIMER START

Not activated: Grey

Start time

Activated: Red

TIMER END

Not activated: Grey

End time

For example above: without action, 00:00 o 'clock and 01:00 o 'clock

will be the on and off time of timing settings.

5. ERROR CODES

See section 4.3

6. SILENT SETTINGS

In the main screen, tap the silent settings button

A pop-up appears with 2 icons:

Button function

Tap this button to activate/deactivate

the START timer

Set Start time

Tap this button to activate/deactivate

the END timer

Set End time