Belimo UK24LON Product Information - Page 4
Browse online or download pdf Product Information for Gateway Belimo UK24LON. Belimo UK24LON 16 pages. Gateway mp/lonworks
Print Page
UK24LON
UK24LON
L
W
®
ON
ORKS
~/+
24 V
MP
Technical data
UK24LON unit
Power supply
AC 24 V 50/60 Hz, DC 24 V
Functional range
AC 19.2...28,8 V, DC 21.6...28.8 V
For wire sizing
3 VA (without MFT(2)/MP actuators connected)
Power consumption
1.5 W
Connections
L
Power:
MFT(2)/MP-
actuators:
MFT-H:
Processor /Memory
Neuron 3150
Transceiver
FTT-10A compatible with LPT-10
Functional Profile
Damper Actuator 8110; see page 8
For further detailed information refer to the L
web site (www.lonmark.org)
LNS-Plug-In
The following are available for LonMaker 2.0:
(configuration
Modifiable
software)
with Plug-In:
Communication with
Belimo-MP-Bus: Master-Slave system 1200 Baud
MFT(2)/MP actuators
No of MFT(2)/MP actuators up to 8 actuators can be connected
Maximum MP
Depends on the number of MFT(2)/MP actuators connected,
conductor length
types of actuators, type of power supply and crosssectional
area of the conductor. Refer to the diagram on page 7
L
W
In accordance with Echelon recommendations
®
ON
ORKS
conductor lengths and
transmission media
Ambient temp. range
0 ºC...+50 ºC
Protection class
Degree of protection
IP20
EMC
CE in accordance with 89/336/EU, 92/31/EU, 93/68/EU
Mounting
DIN rail 35 mm
Weight
ca. 500 g
4
Connect
It is essential to take account of the dimen-
!
through a safety
sion data of the connected MFT(2)/MP
transformer
actuators when selecting the ratings for the
AC 24 V
power supply.
-
+
DC 24 V
W
:
push-screw terminals, 2-pole
®
ON
ORKS
push-screw terminals, 3-pole
push-screw terminals, 4-pole
(all terminals for 1,5 mm
plug socket, 3-pole
(f
or MFT parameterising tools)
®
; 10 MHz; 48 kB flash memory, 8 kB RAM
– MFT(2)/MP actuator addresses
– Min./Max. limits
– Definition of sensors connected
to the MFT(2)/MP actuators
(safety extra-low voltage)
III
Gateway MP to L
MP/LON interface
●
MFT(2)/MP actuators (with MP
●
communications capability)
linked to L
a UK24LON unit
Up to 8 actuators
●
can be connected
L
ON
●
Application
The UK24LON unit is a Belimo gateway
that has been certified by L
allows the Belimo MP-Bus to be linked to
L
W
ON
ORKS
Up to 8 MP capable actuators can be
connected to the MP-Bus side of the sys-
tem (damper actuators, valve actuators
and VAV-Compact).
Mode of operation
Through the UK24LON unit the actua-
tors can be controlled digitally over the
MP-Bus and they also provide feedback
of their current operating status. In the
UK24LON unit the digital data for control
and feedback is converted to standard
MP-Bus
network variables (SNVT's). This allows
the functions of the actuators to be linked
directly to L
Sensor connection
One sensor can be connected to each
MFT2 actuator. It can be either a passive
resistance-type sensor (Pt1000, Ni1000
or NTC), an active sensor (e.g. with a
DC 0...10 V output) or a switching con-
tact. This provides a simple means of
digitising the analogue signal from the
sensor through the actuator so that it
can be passed on to L
UK24LON unit.
Parameterising MFT(2)/MP actuators
)
2
Using the Belimo PC-Tool it is very easy to
preset specific parameters (e.g. running
time) for individual actuators. An MFT pa-
rameterising tool can be connected to the
3-pole plug socket of the UK24LON unit.
M
®
ON
ARK
Important installation note!
Do not energise the system
(UK24LON and actuators) until
all the wiring has been finished.
W
ORKS ®
ON
W
through
ORKS ®
ON
M
certified
ARK ®
M
ON
ARK
®
.
®
W
.
ON
ORKS
W
®
ON
ORKS
®
. It
via the