Duratuf KIWI SHEDS KS1 Assembly Instructions Manual - Page 8

Browse online or download pdf Assembly Instructions Manual for Storage Duratuf KIWI SHEDS KS1. Duratuf KIWI SHEDS KS1 18 pages.

Print Page

Step 1: Front Wall: Position wall sheet on the right hand side

of the doorway with the sheet LIP on the left hand

side. Ensuring the LIP is flush with the side of the

Stud and the top is 45mm below the top of the Ridge

Beam, tack in place.

Step 2: Back Wall: Position the first Wall Sheet with

the LIP on the right hand side. Ensuring the LIP

is flush with the side of the corner Stud and the

top of the Wall Sheet is 45mm down from the

top plate, tack in place. Position the next Wall

Sheet with the LIP on the right hand side. Over-

lap as shown in fig 1 pg 6. Ensuring Wall Sheet

is 45mm down from the top plate, tack in place.

Step 3: End Walls: Position wall sheet with the LIP

flush with the side of the stud and the top of

the Wall Sheet is flush with the top of the Top

Plate, tack in place. Repeat with the other end.

If fitting a window, nail in Window Studs and

Nog now. Refer to Window instructions—Pg.8

Step 4: Nailing Off: Nail one 30mm Clout each side of the Rib (two per Pan) into the Top Plates and Bottom Plates. Nail

Wall Sheets to mid wall Nogs (one per pan). Nail each corner Wall Sheet to Studs using two 30mm Clouts evenly

spaced.

KS1 WALL CLADDING

EDGE

FLUSH