Contemporary Control Systems ARCNET AI-USB Series Installation Manual - Page 4

Browse online or download pdf Installation Manual for Switch Contemporary Control Systems ARCNET AI-USB Series. Contemporary Control Systems ARCNET AI-USB Series 12 pages. Fixed-port active hubs with usb interface

Print Page

INSTALLATION

Mounting

The AI-USB is designed for mounting in a wiring closet or an

industrial enclosure using either set of the provided mounting

hardware listed below:

TS-35 DIN Rail Mounting

DIN rail clip

DIN rail clip support bracket

4-40 screws, pan-head (2)

For quick snap-mounting to 35 mm DIN rail, a reinforced DIN

rail clip is pre-attached to the back of the enclosure with two

#4-40 pan-head screws. If the clip is removed, the unit can be

panel-mounted by extending the top and bottom brackets which

are shipped in retracted position. The extended brackets can

then anchor the unit to a wall or other flat vertical surface with

two #8 pan-head screws (not provided). The left illustration of

Figure 6 shows a rear view of the AI-USB with brackets in

retracted position. The right illustration of

brackets extended and secured to the AI-USB enclosure with

the same screws that were used in the retracted position.

Figure 6 — Using the Panel-Mounting Brackets

Panel Mounting

Panel mounting bracket

4-40 screws, flat-head (4)

TD030500-0IB

Figure 6

shows the