Addonics Technologies AE5SACSUF User Manual - Page 5

Browse online or download pdf User Manual for Enclosure Addonics Technologies AE5SACSUF. Addonics Technologies AE5SACSUF 10 pages. External usb2.0/firewire enclosure

Print Page

Windows98, SE

When you plug your device into the USB2.0 or Firewire controller, the OS

should determine a new device has been plugged in and will bring up the new

hardware wizard window. From here you will need to specify the location of the

driver and then browse to the location where you have the drivers saved.

If the drivers are in a floppy diskette, you will need to point the wizard to the

floppy drive to locate and install the driver. Once the driver is loaded, there

should now be a new CD_ROM icon under My Computer if an ATAPI device

is installed. If you installed a hard drive that has already been partitioned, then

you will see a new hard drive icon instead. If you installed a hard drive that has

not been partitioned, e.g., a bran d new hard drive, you will not see a new icon.

In this case, you must partition and format the drive as described below before

you will be able to see the new hard drive icon and be able to access the drive."

Note: brand new harddrives must be partitioned and formatted first.

Ø Firewire connection requires Windows 98SE or higher.

Ø No drivers required for Firewire Connection, Drivers are

built-in on the operating system.

Ø Only USB2.0 connection requires driver under Windows 98.

Windows Me, 2000 or XP

The external USB2.0/Firewire drive is plug and play under these operating

systems. Drivers are built in on the OS. USB mass storage driver from the

system files loads automatically for the USB connection.

NOTE: Install and run your software to support the Optical drives

installed in the External USB2.0/Firewire case. Check with the

manufacturer for more info.

(CD-ROM, DVD-ROM, CDRW, DVD/CDRW, DVD-/+RW are classified

as ATAPI storage devices)

External USB2.0/Firewire Enclosure Users Guide v1.0