Addonics Technologies AE5SACSUF Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Invólucro Addonics Technologies AE5SACSUF. Addonics Technologies AE5SACSUF 10 páginas. External usb2.0/firewire enclosure
Imprimir páginaWindows98, SE
When you plug your device into the USB2.0 or Firewire controller, the OS
should determine a new device has been plugged in and will bring up the new
hardware wizard window. From here you will need to specify the location of the
driver and then browse to the location where you have the drivers saved.
If the drivers are in a floppy diskette, you will need to point the wizard to the
floppy drive to locate and install the driver. Once the driver is loaded, there
should now be a new CD_ROM icon under My Computer if an ATAPI device
is installed. If you installed a hard drive that has already been partitioned, then
you will see a new hard drive icon instead. If you installed a hard drive that has
not been partitioned, e.g., a bran d new hard drive, you will not see a new icon.
In this case, you must partition and format the drive as described below before
you will be able to see the new hard drive icon and be able to access the drive."
Note: brand new harddrives must be partitioned and formatted first.
Ø Firewire connection requires Windows 98SE or higher.
Ø No drivers required for Firewire Connection, Drivers are
built-in on the operating system.
Ø Only USB2.0 connection requires driver under Windows 98.
Windows Me, 2000 or XP
The external USB2.0/Firewire drive is plug and play under these operating
systems. Drivers are built in on the OS. USB mass storage driver from the
system files loads automatically for the USB connection.
NOTE: Install and run your software to support the Optical drives
installed in the External USB2.0/Firewire case. Check with the
manufacturer for more info.
(CD-ROM, DVD-ROM, CDRW, DVD/CDRW, DVD-/+RW are classified
as ATAPI storage devices)
External USB2.0/Firewire Enclosure Users Guide v1.0
4