4B TouchSwitch TS1V4HT Installation And Setup - Page 3

Browse online or download pdf Installation And Setup for Industrial Equipment 4B TouchSwitch TS1V4HT. 4B TouchSwitch TS1V4HT 8 pages.

Correct installation of the product is important for safety and performance. If you have not asked 4B to
perform the installation of the unit on your behalf, it is critical for the safety of your operation and those who
may perform work on your operation that you select a qualified and competent electrical installer to undertake
the installation. The product must be installed properly to perform its designed functions. The installer should
be qualified, trained, and competent to perform the installation in accordance with Local and National
Electrical Codes, all relevant OSHA Regulations, as well as any of your own standards and preventive
maintenance requirements, and other product installation information supplied with the product. You should
be prepared to provide the installer with all necessary installation information to assist in the installation.
4.
ESTABLISH AND FOLLOW A REGULAR MAINTENANCE AND INSPECTION SCHEDULE FOR
YOUR 4B PRODUCTS
You should develop a proper maintenance and inspection program to confirm that your system is in good
working order at all times. You will be in the best position to determine the appropriate frequency for
inspection. Many different factors known to the user will assist you in deciding the frequency of inspection.
These factors may include but are not limited to weather conditions; construction work at the facility; hours of
operation; animal or insect infestation; and the real-world experience of knowing how your employees
perform their jobs. The personnel or person you select to install, operate, maintain, inspect or perform any
work whatsoever, should be trained and qualified to perform these important functions. Complete and
accurate records of the maintenance and inspection process should be created and retained by you at all
times.
5.
RETAIN AND REFER TO THE OPERATION MANUAL FOR 4B'S SUGGESTED MAINTENANCE
AND INSPECTION RECOMMENDATIONS
As all operations are different, please understand that your specific operation may require additional
adjustments in the maintenance and inspection process essential to permit the monitoring device to perform
its intended function. Retain the Operation Manual and other important maintenance and service documents
provided by 4B and have them readily available for people servicing your 4B equipment. Should you have
any questions, please call the 4B location who supplied the product or the 24-hour hotline number in the USA
-309-698-5611.
6.
SERVICE REQUEST AND ONLINE PRODUCT REGISTRATION
If you have questions or comments about the operation of your unit or require the unit to be serviced please
contact the 4B location who supplied the product or send your request via fax (309-698-5615), email (4b-
[email protected]), or call us via our 24-hour hotline number in the USA - 309-698-5611. Please have
available product part numbers, serial numbers, and approximate date of installation. In order to assist you,
after the product has been placed into service, complete the Online Product Registration section which is
accessed via our website www.go4b.com
Technology Innovation Quality Value
www.go4b.com
Rev2 June 2014