4B TouchSwitch TS1V4HT Installation And Setup - Page 5

Browse online or download pdf Installation And Setup for Industrial Equipment 4B TouchSwitch TS1V4HT. 4B TouchSwitch TS1V4HT 8 pages.

Print Page

Supply Voltage:

Power Consumption:

Indication:

Adjustment:

Output:

Body Construction:

Face Construction:

Conduit Entry:

Cable Length:

Conductors:

Weight:

Protection:

Dimensions:

Wiring:

All Wiring Must Be In Accordance With Local And National Electrical Codes And

Should Be Undertaken By An Experienced And Professional, Qualified Electrician.

Mount a suitable junction box within 3m of the sensor, and using a suitable conduit to

protect the cables, make the necessary wiring connections inside this junction box. A 3m

long PVC coated cable connected to the sensor contains the following 22 AWG wires:

Red

Black

Green

White

Blue

Orange

Note: The TouchSwitch contains a non repairable 160mA fuse.

Note: The relay contact is energized when power is supplied to the sensor and de-energizes when the sensor

detects the belt or pulley. Relay contact closed between White and Blue when unit is powered and Led is on

"Red" LED on: indicates power and relay energized.

"Red" LED off: indicates relay de-energized and/or no power.

Use shielded cable and keep separate from high voltage cables

Never run TouchSwitch cables in the same conduit as 3-phase motor cables

Track belts and commission plant prior to installing Touchswitches.

12 vdc (TS1V3HT)

60mA

Red LED indicates when powered up and relay is energized.

Force Sensitivity is factory set to 8 lb (3.6 Kg) approx.

Voltage free changeover relay contact rated at 5A 250vac

Non-inductive.

Pressed seamless steel, powder coated.

Hardened and annealed stainless steel.

½" NPT

9ft (3M)

6 at 22awg (see "wiring" below)

3 lb (1.36 Kg)

NEMA 4X, IP 66

3.5" Diameter x 1.75" Deep (see diagram above)

+12 vdc (TS1V3HT)

0 vdc

Ground

Relay Common Connection

Relay Contact, N.O.

Relay Contact, N.C.

WARNINGS

TouchSwitch Wiring is Low Voltage DC

Never weld near or around the TouchSwitch

Technology Innovation Quality Value

www.go4b.com

Rev2 June 2014

24 vdc (TS1V4HT)

50mA

+24 vdc (TS1V4HT)