Aplisens CS-27/W Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Measuring Instruments Aplisens CS-27/W. Aplisens CS-27/W 13 pages. Hydrostatic fuel level probe for installation on the fuel filler

Print Page

 Screw the bottom body (1) with three screws (5) to tank filler.

 Screw the upper body (2) with seal II (4) to lower body (1) with two M4x25 screws (6).

 Secure the wire with protective pipe, clamp the pipe at wire outlet with cable tie, lead the

wire into driver's cabin in such a way as to minimize possible thermal and mechanical

damage resulting from regular usage of vehicle.

 Thread the sealing cord through the opening in screw head locking screw, wrap it around

the protective pipe and seal it.

 Screw the cap on. Unscrew and screw the cap back on several times to verify the

stability of mounting on the tank filler.

CONNECTION

All connection and installation steps must be performed with power disconnected.

02.B.003

Probe electrical outlets diagram:

IO.CS-27/W.CS-27/BAK