AddSecure Edge RT7020 Enterprise User Manual - Page 9

Browse online or download pdf User Manual for Security System AddSecure Edge RT7020 Enterprise. AddSecure Edge RT7020 Enterprise 11 pages.

Print Page

8 Technical Specifications Edge RT7020 Enterprise

8.1

Connection

LINE

D+ D-

T C

REL5

REL4

REL3

REL2

REL1

IN1-IN8

O1-O4

BAT+ -

PWR+ -

Function

Simulated telephone line for connecting of analogue dialer. Designed for a local

direct connection, i.e. not for connections between buildings.

RS-485 interface for communication to/from external equipment.

T: For connecting external tamper (if such is present) C: Common (GND)

Normally open. Indicates a successful transmission of IN1 to ARC by closing for 2s

Normally open. Indicates an unsuccessful transmission of IN1 to ARC by closing

for 2s

Normally closed. Is held open if alarm transmission has failed or if it is not

possible to perform via the radio interface.

Normally closed. Is held open if alarm transmission has failed or if it is not

possible to perform via Ethernet.

Normally closed. Is held open during system fault. Meaning when an alarm can't

be delivered to the ARC neither by the radio or the Ethernet interface

Alarm inputs 1-8. Activated by potential free closing or opening from system

ground (C) and/or tamper, depending on how the inputs have been configured

during programming.

System ground (GND)

Remotely controllable potential free outputs. Max current: 100mA per output

Connection for auxiliary power source, max 11-30 VDC. To be fused with an

external fuse 1A and labelled with what part of the unit that becomes unpowered

when removing the fuse.

Connection for primary power source, max 11-30 VDC. To be fused with an

external fuse 1A and labelled with what part of the unit that becomes unpowered

when removing the fuse

WAN-connector, connection to local network

LAN-connectors, for connecting local IP equipment

RS-232 interface for communication from external system.