AddSecure Asset Series Installation Manual - Page 9

Browse online or download pdf Installation Manual for Automobile Accessories AddSecure Asset Series. AddSecure Asset Series 14 pages.

Print Page

5 Unit on/off and LED

ON/OFF button

When the unit is off it must not be

connected to a power source.

• Press button for 5 seconds till yellow lamp

starts to flash differently.

• Release the button and press it briefly

again. Turn off the unit.

Yellow. System service

• Constant light: System starts.

• 1 flash: System is on, but not connected

to GSM data.

• 2 fast flashes: System is on server.

6 Final test

Send a SMS with the text: STAT to the GSM number of the unit. The following reply must be received

Version=Blackbird 0.11

OPT2

FW=0.35

NodeID=3090818019

BattV=3987

Runtime= 3239

MCC=23802

Signal= 81

Sat=11

HDOP=10

Ichg=127.6

Bt=35.60

Odo

All values stated after = are examples.

Yellow

Blue

Red

Green

Blue. GPS receiver

• 1 quick flash: No GPS satellites received

• 1 long flash followed by a number of quick

flashes: Receiving GPS. The number of

short flashes states the number of

satellites being received.

Meaning

Software version

Firmware Version in OPT2 board (PRO version only)

Firmware program version

The serial number (S/N) of the unit

Current battery voltage in mV – typically between 3650mV and 4200mV

Number of seconds that the unit has been on

Provider network code

GSM signal strength – must be between 100 and 50. Low is best

No of satellites

GPS HDOP value GPS quality

Charging power

Battery temperature

Current Odometer value

0/1 valid time or not on unit

USB-input for charger

230 V charger and

12/24 V cigarette charger

available as option.

Installation inputs

Red. Power/Charging status Constant light:

Fully uploaded

• 1 flash: battery low level

• 2 flashes: Charging

Green. GSM service

• Flashing sporadic: OK

• Flashing constant: SIM card error