AddSecure Asset Series Instrukcja instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe AddSecure Asset Series. AddSecure Asset Series 14 stron.
Drukuj stronę5 Unit on/off and LED
ON/OFF button
When the unit is off it must not be
connected to a power source.
• Press button for 5 seconds till yellow lamp
starts to flash differently.
• Release the button and press it briefly
again. Turn off the unit.
Yellow. System service
• Constant light: System starts.
• 1 flash: System is on, but not connected
to GSM data.
• 2 fast flashes: System is on server.
6 Final test
Send a SMS with the text: STAT to the GSM number of the unit. The following reply must be received
Reply
Version=Blackbird 0.11
OPT2
FW=0.35
NodeID=3090818019
BattV=3987
Runtime= 3239
MCC=23802
Signal= 81
Sat=11
HDOP=10
Ichg=127.6
Bt=35.60
Odo
Vt
All values stated after = are examples.
Yellow
Blue
Red
Green
Blue. GPS receiver
• 1 quick flash: No GPS satellites received
• 1 long flash followed by a number of quick
flashes: Receiving GPS. The number of
short flashes states the number of
satellites being received.
Meaning
Software version
Firmware Version in OPT2 board (PRO version only)
Firmware program version
The serial number (S/N) of the unit
Current battery voltage in mV – typically between 3650mV and 4200mV
Number of seconds that the unit has been on
Provider network code
GSM signal strength – must be between 100 and 50. Low is best
No of satellites
GPS HDOP value GPS quality
Charging power
Battery temperature
Current Odometer value
0/1 valid time or not on unit
USB-input for charger
230 V charger and
12/24 V cigarette charger
available as option.
Installation inputs
Red. Power/Charging status Constant light:
Fully uploaded
• 1 flash: battery low level
• 2 flashes: Charging
Green. GSM service
• Flashing sporadic: OK
• Flashing constant: SIM card error
7