Addtron Technology AWS-110 User Manual - Page 13

Browse online or download pdf User Manual for Wireless Access Point Addtron Technology AWS-110. Addtron Technology AWS-110 15 pages. 11mbps wireless access point
Also for Addtron Technology AWS-110: Quick User Manual (6 pages)

Print Page

The IP Mask field must be set to the same Subnet Mask as with the

Wireless Network Access Point.

Privacy Option

From the Setup tab, select the Wireless LAN item and then the

Privacy Options item. Windows will bring you to the Privacy

Options screen. The 64 -bit WEP keys can be set for four different

k e y s : Key 1, Key 2, Key 3, and Key 4 . The check box besides the

WEP Enable is to enable the WEP security feature. Click the OK

b u t t o n .

Wireless Operational Settings

From the Setup tab, select the Wireless LAN item and then the

Optional Settings item. Windows will bring you to the Wireless

Operational Settings screen.

Wireless Access Point

The ESSID is a unique name shared among all points in a wireless

network. The ESSID must be the same for all points in the network.

It is case sensitive and must not exceed 32 characters.

The Channel field setting specifies the channel used in wireless

communication and should be set to the same channel as the other

points in the wireless network.

The Fragmentation Threshold field sets the length of the fragment.

Each fragment is a frame no larger than the Fragmentation Threshold.

The RTS/CTS Threshold field sets the length threshold. An Access

Point uses a RTS/CTS exchange for directed frames only when the

length of the MPDU is greater than the length threshold.

The Auto Rate Fall Back is for roaming flexibility. When the

wireless devices move away from the Wireless Access Point, the

transfer rate will automatically fall back to the optimum rate.

The Authentication Type field sets the type of authentication service.

The Open System mode is for any wireless device. The Shared Key

mode is for a wireless device with a shared secret key.

The Preamble Type field sets the length of preamble. The Long

mode is set to 144 bits. The Short mode is set to 72 bits.

The Basic Rates field is set for the transfer rate for the Access Point.

Commands

Reset Device

Wireless Access Point