Addtron Technology AWS-110 Kullanıcı Kılavuzu - Sayfa 13

Kablosuz Erişim Noktası Addtron Technology AWS-110 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Addtron Technology AWS-110 15 sayfaları. 11mbps wireless access point
Ayrıca Addtron Technology AWS-110 için: Hızlı Kullanım Kılavuzu (6 sayfalar)

The IP Mask field must be set to the same Subnet Mask as with the
Wireless Network Access Point.
Privacy Option
From the Setup tab, select the Wireless LAN item and then the
Privacy Options item. Windows will bring you to the Privacy
Options screen. The 64 -bit WEP keys can be set for four different
k e y s : Key 1, Key 2, Key 3, and Key 4 . The check box besides the
WEP Enable is to enable the WEP security feature. Click the OK
b u t t o n .
Wireless Operational Settings
From the Setup tab, select the Wireless LAN item and then the
Optional Settings item. Windows will bring you to the Wireless
Operational Settings screen.
22
Wireless Access Point
The ESSID is a unique name shared among all points in a wireless
network. The ESSID must be the same for all points in the network.
It is case sensitive and must not exceed 32 characters.
The Channel field setting specifies the channel used in wireless
communication and should be set to the same channel as the other
points in the wireless network.
The Fragmentation Threshold field sets the length of the fragment.
Each fragment is a frame no larger than the Fragmentation Threshold.
The RTS/CTS Threshold field sets the length threshold. An Access
Point uses a RTS/CTS exchange for directed frames only when the
length of the MPDU is greater than the length threshold.
The Auto Rate Fall Back is for roaming flexibility. When the
wireless devices move away from the Wireless Access Point, the
transfer rate will automatically fall back to the optimum rate.
The Authentication Type field sets the type of authentication service.
The Open System mode is for any wireless device. The Shared Key
mode is for a wireless device with a shared secret key.
The Preamble Type field sets the length of preamble. The Long
mode is set to 144 bits. The Short mode is set to 72 bits.
The Basic Rates field is set for the transfer rate for the Access Point.
Commands
Reset Device
Wireless Access Point
23