DataApex Alltech 3300 ELSD Manual - Page 11

Browse online or download pdf Manual for Control Systems DataApex Alltech 3300 ELSD. DataApex Alltech 3300 ELSD 20 pages. Clarity controls

Print Page

4 Using the control module

4.1 Alltech 3300 ELSD Setup

The

Alltech 3300 Setup

communication between Clarity and the detector.

IP Address

IP address of the detector in your local network.

AutoDetect

This button is used to test the connection to the Alltech 3300 ELSD

detector using the previously set IP Address . Obtained data about the

detector are then displayed in the dialog.

Signal 1 - Name

Enables to set the relevant detector name.

Digital Output Names

Displays the

labels of Alltech 3300 ELSD digital outputs. The custom names are

displayed in the

Monitor" on pg 14.

Keyboard Lock

When checked, locks the keyboard of the detector and prevents other

users on the same network to connect the machine.

dialog serves for the correct setting of the

Fig 4: Alltech 3300 Setup

Digital Output Names

Device Monitor

Fig 5: Digital Output Names

dialog which enables to set the custom

window described in the chapter "Device

- 7 -

Clarity Controls