DataApex Alltech 3300 ELSD Manual - Página 11
Procurar online ou descarregar pdf Manual para Sistemas de controlo DataApex Alltech 3300 ELSD. DataApex Alltech 3300 ELSD 20 páginas. Clarity controls
Imprimir página4 Using the control module
4.1 Alltech 3300 ELSD Setup
The
Alltech 3300 Setup
communication between Clarity and the detector.
IP Address
IP address of the detector in your local network.
AutoDetect
This button is used to test the connection to the Alltech 3300 ELSD
detector using the previously set IP Address . Obtained data about the
detector are then displayed in the dialog.
Signal 1 - Name
Enables to set the relevant detector name.
Digital Output Names
Displays the
labels of Alltech 3300 ELSD digital outputs. The custom names are
displayed in the
Monitor" on pg 14.
Keyboard Lock
When checked, locks the keyboard of the detector and prevents other
users on the same network to connect the machine.
dialog serves for the correct setting of the
Fig 4: Alltech 3300 Setup
Digital Output Names
Device Monitor
Fig 5: Digital Output Names
dialog which enables to set the custom
window described in the chapter "Device
- 7 -
Clarity Controls