DataComm 50-3321-WH-KIT Instruction/Installation Sheet - Page 3

Browse online or download pdf Instruction/Installation Sheet for Accessories DataComm 50-3321-WH-KIT. DataComm 50-3321-WH-KIT 3 pages. Flat panel tv cable organizer remodeling kit with power outlet

Print Page

Use DataComm Electronics' Single Gang Recessed

Low Voltage Cable Plate to install low voltage cables

behind your amplifier or other audio and video

devices. This Recessed Low Voltage Cable Plate is

designed for use with Low Voltage / Data cables "only"

(see Figures 5 & 6).

The Single Gang Recessed Cable Plate is designed to

be used with the enclosed single gang low voltage

mounting bracket (see Figure 4). The recessed cable

plate can be installed upright or upside down (see

Figures 5 & 6 for upright installation).

Determine the location of your amplifier or audio/video

device. Cut a hole in the wall and install the low

voltage mounting plate bracket. Then simply pull your

low voltage cables through the mounted low voltage

mounting plate bracket and then through the

DataComm Electronics recessed low voltage cable

plate. Insert the DataComm Electronics recessed low

voltage cable plate into your mounted low voltage

mounting plate bracket and using the supplied wall

plate screws, secure the wall plate tightly to the wall.

Connect your A/V cables to your equipment.

This Recessed Cable Plate is Designed for Use

with Low Voltage / Data Cables "ONLY"

CAUTION



Never install low voltage wiring during

lightning storms.



Never install low voltage wiring in wet

locations unless the wire is specifically

designed for wet locations.



Never touch un-insulated low voltage wires

or terminals unless the wire has been

disconnected at its source.



Use caution when installing low voltage

cables.

IMPORTANT INSTRUCTIONS



Read and understand all instructions.



Follow all warning and instructions marked

on the product.



Do not use this product near water, for

example near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool.



SAVE THESE INSTRUCTIONS.

This product is patent protected by

U.S. Patent numbers 553475, D554475 and 7390964

Multiple patents pending

RoHS Compliant

Instruction / Installation Sheet

DataComm Electronics Single Gang Recessed Cable Plate

Figure 4

Figure 6 - Back View

Page 3 of 3

Figure 5 - Front View

3/23/10 Rev. 5