DataComm 50-3321-WH-KIT Folha de instruções/instalação - Página 3
Procurar online ou descarregar pdf Folha de instruções/instalação para Acessórios DataComm 50-3321-WH-KIT. DataComm 50-3321-WH-KIT 3 páginas. Flat panel tv cable organizer remodeling kit with power outlet
Imprimir páginaUse DataComm Electronics' Single Gang Recessed
Low Voltage Cable Plate to install low voltage cables
behind your amplifier or other audio and video
devices. This Recessed Low Voltage Cable Plate is
designed for use with Low Voltage / Data cables "only"
(see Figures 5 & 6).
The Single Gang Recessed Cable Plate is designed to
be used with the enclosed single gang low voltage
mounting bracket (see Figure 4). The recessed cable
plate can be installed upright or upside down (see
Figures 5 & 6 for upright installation).
Determine the location of your amplifier or audio/video
device. Cut a hole in the wall and install the low
voltage mounting plate bracket. Then simply pull your
low voltage cables through the mounted low voltage
mounting plate bracket and then through the
DataComm Electronics recessed low voltage cable
plate. Insert the DataComm Electronics recessed low
voltage cable plate into your mounted low voltage
mounting plate bracket and using the supplied wall
plate screws, secure the wall plate tightly to the wall.
Connect your A/V cables to your equipment.
This Recessed Cable Plate is Designed for Use
with Low Voltage / Data Cables "ONLY"
CAUTION
Never install low voltage wiring during
lightning storms.
Never install low voltage wiring in wet
locations unless the wire is specifically
designed for wet locations.
Never touch un-insulated low voltage wires
or terminals unless the wire has been
disconnected at its source.
Use caution when installing low voltage
cables.
IMPORTANT INSTRUCTIONS
Read and understand all instructions.
Follow all warning and instructions marked
on the product.
Do not use this product near water, for
example near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.
SAVE THESE INSTRUCTIONS.
This product is patent protected by
U.S. Patent numbers 553475, D554475 and 7390964
Multiple patents pending
RoHS Compliant
Instruction / Installation Sheet
DataComm Electronics Single Gang Recessed Cable Plate
Figure 4
Figure 6 - Back View
Page 3 of 3
Figure 5 - Front View
3/23/10 Rev. 5