Elsema iS2000 User Manual - Page 2

Browse online or download pdf User Manual for Gate Opener Elsema iS2000. Elsema iS2000 7 pages. High speed sliding gate opener elsema’s eclipse control card with gds operator
Also for Elsema iS2000: User Manual (8 pages)

Print Page

Place operator in correct position (Pinion wheel to be

parallel to the gate and stepped out to allow for width

of rack once it is mounted onto the gate frame). Mark

out fixings and fix operator to the concrete pad.

Once the rack is fixed move the gate and sight the

rack moving over the pinion wheel, check that most of

the pinion wheel meshes with the rack. Make sure

rack runs freely over the pinion wheel, any tights

spots should be corrected by adjusting the rack height.

Check the operator is firmly bolted down to the

concrete pad.

Connect required P.E Beams.

Limit switches can be used in 2 different configurations

1. Limit switch initiates ramp down and the gate stops as per ramp down time.

2. Limit switch initiates slow speed and the gate stops on slow speed overload after hitting the end

stoppers.

Follow the on screen instructions to commission the gate.

Quick start instructions

Fix rack to the gate frame keeping 1mm-2mm clearance

between the rack teeth and Pinion wheel

Ensure stops are installed on the gate for the fully closed and

fully open positions.