Elsema Gigalink GLR43308 Setup And Programming Instructions - Page 3

Browse online or download pdf Setup And Programming Instructions for Receiver Elsema Gigalink GLR43308. Elsema Gigalink GLR43308 8 pages. 8 channel receiver

Print Page

GLR43308 and GLR2708

Setup and programming instructions for the 8 channel Gigalink

FEATURES

› Eight channel receiver with 8 open collector outputs

› Supply voltage can be AC or DC

› Low current consumption

› Over 4 billion code combinations

› Crystal controlled for high reliability

› Can store unlimited number of transmitters

› Uses micro-controller technology that can be re-programmed to suit unique applications

› Momentary, latching and security latching modes are all user selectable

› Optional QM100 bracket available for easy mounting to cases or walls

› E version receiver available with a weatherproof case

DESCRIPTION

This Gigalink

receiver gives you eight open collector outputs switching to ground with a capacity of 125mA 40

™

VDC each. Each open collector output is protected with a diode to stop any EMF from getting to the receiver.

The receiver's micro-controller can store unlimited number of transmitters with a high security level using the

encrypted 32-bit digital code. Included with the receiver is the Gigalink™ programming cable.

TECHNICAL DATA

Supply Voltage

Frequencies for GLR43308

Frequency for GLR2708

Output

Antenna

Compatible Transmitters

Enter the World of Wireless

11.0 - 28 VDC, 10.0 - 28 VAC. Can use Elsema DC or AC power supply, 12PP1000

or 24PP.

433.920 (Standard), 433.664, 433.408, 433.152MHz

27.195MHz

Eight open collector outputs.

ANT433 series (433MHz Series) or ANT27 series (27MHz Series)

GLT433 MHz series, GLT27 MHz series

receiver

™