Datakom DFC-0108 Installation Manual - Page 3

Browse online or download pdf Installation Manual for Controller Datakom DFC-0108. Datakom DFC-0108 8 pages. Power factor controller 8 banks, harmonic distortion

Print Page
Datakom DFC-0108 Installation Manual

PUSHBUTTON FUNCTIONS

BUTTON
FUNCTION
In AUTO mode, acknowledges the displayed alarm.
If the same alarm occurs again, it will not appear on the display.
HELD PRESSED DURING 5 SEC:
Resets all alarms and the alarm led.
Any new coming alarm will appear on the display.
HELD PRESSED DURING 10 SEC AT POWER-ON:
The unit enters automatic setup mode.
Switch to upper display or previous parameter
or increase related value (programming mode)
Switch to lower display or next parameter
or decrease related value (programming mode)
HELD PRESSED DURING 5 SEC:
Switches between AUTO and MANUAL modes. In MANUAL mode the
stepping is disabled. From the MANUAL mode TEST mode can be
selected in order to test each step manually.
HELD PRESSED DURING 5 SEC IN MANUAL MODE:
Switches between MANUAL and TEST modes. In TEST mode, all steps
may be turned on and off manually. For more detailed information
please check chapter 4.2.
HELD PRESSED TOGETHER DURING 5 SEC:
Enters or exits programming mode.