Datakom DPR-145 User Manual - Page 4

Browse online or download pdf User Manual for Relays Datakom DPR-145. Datakom DPR-145 19 pages. Temperature protection relay

Print Page

DPR-145 User Manual

1. INSTALLATION

Before installation:

• Read the user manual carefully, determine the correct connection diagram.

• Remove all connectors and mounting brackets from the unit, then pass the unit through

the mounting opening.

• Put mounting brackets and tighten. Do not tighten too much, this can brake the

enclosure. Spring type brackets do not require tightening.

• Make electrical connections with plugs removed from sockets, then place plugs to their

sockets. Otherwise sockets may get damaged.

• Make sure not overloading relay outputs. Use additional contactors if required.

Below conditions may damage the device:

• Incorrect connections.

• Incorrect power supply voltage.

• Voltage at measuring terminals beyond specified range.

• Current at measuring terminals beyond specified range.

• Overload or short circuit at relay outputs

Below conditions may cause abnormal operation:

• Power supply voltage below minimum acceptable level.

-4-

V-3.0

(14.09.2016)