Elsner 70513 Installation And Adjustment - Page 10
Browse online or download pdf Installation And Adjustment for Controller Elsner 70513. Elsner 70513 20 pages. Multifunctional actuators
Print Page
Control of an external motor control unit via the output:
control unit
Manual switch input
Inputs:
Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •
Motor
Technical changes and errors excepted.
8
Note: The Actuators KNX S1R-UP can
also be used with direct-current voltage
(12 V DC, 24 V DC) due to their potential-
free output. The „L" connector is used as
„Com" in this case. The automatic runtime
measurement is not possible with direct-
currant voltage!
Example KNX S1R-B4-UP with
binary contact on input 1
and T-NTC temperature sensor on input 4.
Connection of the temperature sensor is in-
dependent of the polarity.
Installation and start-up