Elsner 70513 Встановлення та налаштування - Сторінка 10

Переглянути онлайн або завантажити pdf Встановлення та налаштування для Контролер Elsner 70513. Elsner 70513 20 сторінок. Multifunctional actuators

Control of an external motor control unit via the output:

control unit

Manual switch input

Inputs:

Actuators KNX S1R-UP • Version: 27.05.2020 • from software version 4.00, ETS programme version 4.00 •

Motor

Technical changes and errors excepted.

Note: The Actuators KNX S1R-UP can

also be used with direct-current voltage

(12 V DC, 24 V DC) due to their potential-

free output. The „L" connector is used as

„Com" in this case. The automatic runtime

measurement is not possible with direct-

currant voltage!

Example KNX S1R-B4-UP with

binary contact on input 1

and T-NTC temperature sensor on input 4.

Connection of the temperature sensor is in-

dependent of the polarity.

Installation and start-up