Elsner KNX PS640+USB Installation And Adjustment - Page 5

Browse online or download pdf Installation And Adjustment for Power Supply Elsner KNX PS640+USB. Elsner KNX PS640+USB 16 pages. Power supply systems with bus functions

Print Page

Installation

Observe the correct installation. Incorrect installation may destroy the power supply

system or connected electronic devices.

After the auxiliary voltage is applied the device will enter an initialisation phase lasting 5

seconds. During this phase no information can be received via the bus.

Housing

Scheme

Auxiliary supply 24 V DC

(max. 150 mA)

Bus voltage power

OUT (KNX terminal + / -)

Programming LED and

programming bushbutton

Bus data (KNX terminal

+ / -), connection for line

or main line or sector

Input operating voltage

230 V AC, L / N / PE

USB interface

(only KNX PS640+USB)

Output direct current

voltage 24 V DC, + / -

Connections 4 and 6 are

suitable for solid conductors

up to 1.5 mm² or conductors

with fine wires.