Elsner KNX PS640+USB Kurulum ve Ayarlama - Sayfa 5

Güç Kaynağı Elsner KNX PS640+USB için çevrimiçi göz atın veya pdf Kurulum ve Ayarlama indirin. Elsner KNX PS640+USB 16 sayfaları. Power supply systems with bus functions

Sayfayı Yazdır

Installation

Observe the correct installation. Incorrect installation may destroy the power supply
system or connected electronic devices.
After the auxiliary voltage is applied the device will enter an initialisation phase lasting 5
seconds. During this phase no information can be received via the bus.
Housing
Scheme
Auxiliary supply 24 V DC
(max. 150 mA)
1
Bus voltage power
OUT (KNX terminal + / -)
2
Programming LED and
programming bushbutton
3
Bus data (KNX terminal
+ / -), connection for line
or main line or sector
4
Input operating voltage
230 V AC, L / N / PE
5
USB interface
(only KNX PS640+USB)
6
Output direct current
voltage 24 V DC, + / -
Connections 4 and 6 are
suitable for solid conductors
up to 1.5 mm² or conductors
with fine wires.
5