elsner elektronik KNX LW sl Technical Specifications And Installation Instructions - Page 9
Browse online or download pdf Technical Specifications And Installation Instructions for Accessories elsner elektronik KNX LW sl. elsner elektronik KNX LW sl 13 pages. Brightness and wind sensor
Print Page
A
Pole installation
The device is installed on the pole with the enclosed stainless steel mounting band.
Rubber
gasket
Cable guide
2.4.3. Connection
The connector is in the lower part of the housing.
Brightness and Wind Sensor KNX LW sl • Status: 05.11.2014 • Errors excepted. Subject to technical changes.
9
B
C
Fig. 12
Feed the mounting band through the eyelets
in the lower part of the housing.
Fig. 13
Break the cable guide off.
Feed the power lead through the rubber gas-
ket.
Installation and start-up
Fig. 11
Dimensions in mm. Variations are
possible for technical reasons
A/B 2× longitudinal holes 8 mm ×
5.5 mm
C
Position of the cable outlet (rub-
ber gasket) in the housing