Dust Right 1250 CFM Instructions - Page 3

Browse online or download pdf Instructions for Water Filtration Systems Dust Right 1250 CFM. Dust Right 1250 CFM 4 pages. Dust canister filter

Print Page

> Turn off and unplug your Dust Right 1250 CFM Wall-Mount

Dust Collector before attempting to install the Canister

Filter, emptying or changing the Plastic Bag and before

any maintenance.

> Make sure to read, understand and follow all of the safety

rules and instructions in the manual that came with your

Dust Right 1250 CFM Wall-Mount Dust Collector when

using it with the Canister Filter.

> Keep hair, loose clothing, fingers, and all parts of body

away from openings and moving parts.

> Use proper lifting technique and get the help of another adult to lift the Canister Filter when attaching it to the Dust Collector.

Failure to do so could result in serious injury.

> For easiest installation of the Canister Filter, first mount

the Dust Right 1250 CFM Wall-Mount Dust Collector at

its final location, following the instructions that came with

the dust collector.

> When mounting the Dust Collector, the top set of Lag

Screws must be located at least 65" from the floor to

provide needed clearance for the Large Canister Filter.

Assembly

1. If the foam tape that came with your Dust Right 1250 CFM

Wall-Mount Dust Collector has become damaged or has

come off the outlet port of the motor assembly, wrap the

1mm x 30mm x 16

⁄

" Foam Tape around the bottom of the

outlet port, making sure the bottom edge of the tape is

against the outlet flange. Trim any excess.

The Hex Head Bolts will thread into the

Attachment Collar pieces in only one direction.

2. Bring the two pieces of the Attachment Collar (A and B)

together around the Foam Tape on the dust collector's outlet

port and connect them with the 1/4" x 1/2" Flange Bolts.

Use the Open Wrench to tighten.

3. Place the Gasket over the opening on top of the Canister

Filter, taking care to align the screw holes.

PRODUCT SPECIFIC SAFETY WARNINGS

> Periodically inspect dust and filter bags for any cuts,

rips or tears. Do NOT operate the dust collector with

a damaged bag or hose.

> After assembly or maintenance, make sure that you

have removed all loose tools from the machine before

turning it on.

> Empty bag regularly. Do NOT fill the bag more than half-full.

> Wear safety glasses and a dust mask/respirator while

emptying the bag.

> This Canister Filter is designed for use ONLY with the

Dust Right 1250 CFM Wall-Mount Dust Collector.

Attachment Collar A

Hex Head Bolt

Attachment Collar B

Attachment Collar Assembly

Hex Head Bolt

1mm x 30mm x

⁄

" Foam Tape