Datalogic Magellan 9400i Quick Reference Manual - Page 12

Browse online or download pdf Quick Reference Manual for Scanner Datalogic Magellan 9400i. Datalogic Magellan 9400i 16 pages. Scanner and scanner-scale with imaging technology
Also for Datalogic Magellan 9400i: Setup Manual (14 pages)

Print Page
Datalogic Magellan 9400i Quick Reference Manual

Error Codes

Upon startup, if the scanner sounds a long error tone followed by alternating flashing of
the green and yellow LED indicators, and an error code is displayed on the Health & Sta-
tus Indicator, this means the scanner has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. The scanner remains in this mode,
until any button is pushed.
After a button is pushed, the scanner flashes the green LED a set number of times to
indicate the error code. After one cycle of flashing has passed, another button push
resets the scanner. The Product Reference Guide (PRG) describes the LED flash codes
associated with an error found. If your scanner indicates any of these errors, note the
code number, then contact Helpdesk for assistance.
ScaleSentry
Indications
TM
Flashing Red = ScaleSentry beam blocked.
Off = ScaleSentry beam is not blocked
Sensormatic® EAS Indications
If the scanner is equipped with the optional Sensormatic EAS opton, various deactivation
and validation indications will be enabled.
INDICATION
Entering EAS
Green ON
Coupled Mode
Upon sensing an inac-
Red ON
tive to active transi-
Green OFF
tion
Red OFF
Upon sensing an active
to inactive transition
Green ON
Upon receiving
Orange ON until
EAS beeper
validation of EAS tag
turns OFF
deactivation
EAS Bad Beep
N/A

Label Programming Mode Indications

These indications occur only when the scanner is in Programming Mode or when placing
the scanner in that mode.
Label Programming Mode Entry
Acceptance of Partial Labels
Partial Label Reading Cancel
Acceptance of Complete Labels
8
EAS LED
Count Frequency Volume
N/A
N/A
N/A
1
~ 1500 Hz Current
Same as FRU error tone
INDICATION
Continuous blink 1 sec. ON
BEEPER
Duration
Configurable
LED
/ 1 sec. OFF
N/A
N/A
N/A
COMMENT
While in EAS Coupled Mode.
While in EAS Coupled Mode.
While in EAS Coupled Mode.
While in EAS Coupled Mode.
BEEP(S)
Same as good read indication
1
6
3
TM
Magellan
9300i and 9400i