Datalogic S70 Quick Start Manual - Page 9
Browse online or download pdf Quick Start Manual for Accessories Datalogic S70. Datalogic S70 10 pages. Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
Also for Datalogic S70: Manual (18 pages)
Print Page
TECHNICAL DATA
Sensing Beam:
Supply Voltage:
Power and Current Consumption
(exclusive of load):
Supply Protection Circuitry:
Delay at Power Up:
Output Configuration:
Discrete Output Rating:
Analogue Output Recovery Time:
Analogue Output Ripple Content (p-
p):
Analogue Output Rating:
Output Protection:
Construction:
Environmental Rating:
Operating Temperature:
Storage Temperature:
Humidity:
Connections:
Response Speed and Features
Description
High Speed
Fast
Standard
Long Range
Extra Long Range
NOTE:
These values are valid for opposed mode sensing using a 1 mm diameter core plastic fiber.
Voltage output models:
Current output models:
Standard display mode:
ECO display mode:
Protected against reverse polarity, overvoltage, and transient voltages
500 milliseconds max.; outputs do not conduct during this time
Voltage Output Models: 1 analogue voltage output (user configurable as 1 to 5 V or 0 to 10 V)
Current Output Models: 1 analogue current output (4 to 20 mA) with 1 current sinking (NPN)
100 mA maximum combined load—analogue plus discrete outputs
(derate 1 mA per °C above 30 °C)
OFF-state leakage current: < 5 A at 30 VDC;
ON-state saturation voltage: NPN: < 1.5 V; PNP : < 2 V
< 2× the selected response speed
< 0.5% of the full scale analogue output
Voltage Outputs:
Current Outputs:
Protected against output short-circuit, continuous overload,
transient over-voltages, and false pulse on power up
Black ABS / Polycarbonate alloy (UL94 V-0 rated)
housing, clear polycarbonate cover
IEC IP50, NEMA 1
10 °C ... +55 °C
20 °C... +85 °C
50% at +50 °C maximum relative humidity (non- condensing)
4-pin M8 connector
Response
Repetition Period
Speed
250 μs
50 μs
500 μs
50 μs
1 ms
50 μs
4 ms
50 μs
12 ms
50 μs
Visible red, 635 nm
12 to 30 VDC Class 2 (10% maximum ripple)
10 to 30 VDC Class 2 (10% maximum ripple)
840 mW, Current consumption < 35 mA at 24 VDC
672 mW, Current consumption < 28 mA at 24 VDC
with 1 current sinking (NPN) or 1 current sourcing (PNP)
discrete output, depending on model.
or 1 current sourcing (PNP) discrete output, depending on model
2.5 kOhm minimum load resistance
1 kOhm maximum load resistance at 24 V;
maximum load resistance = [(Vcc - 4)/.02] Ohms
Cross-Talk
Repeatability
Avoidance
50 μs
No
75 μs
Yes
90 μs
Yes
90 μs
Yes
90 μs
Yes
9
Energy
Maximum
Efficient Light
Range
Resistance
No
900 mm
No
1125 mm
Yes
1125 mm
Yes
1462.5 mm
Yes
2250 mm