Dateq XTC II Manual - Page 12

Browse online or download pdf Manual for DJ Equipment Dateq XTC II. Dateq XTC II 19 pages.

Print Page

Setup

Jumper settings

To be able to reach the internal jumpers the AC-cord has to be disconnected

from the mains first. Then the 8 torx screws of the front panel can be

unscrewed and the front panel can be flipped open gently .

MIC Phantom voltage

Inside left, at the back, on the top board the Mic-Phantom jumper

is situated. This controls the phantom voltage:

ON is top position,

OFF is the bottom position.

Phono / Line select

Inside, at the back, on the bottom

board the Phono/line jumpers are

situated. These control the input

sensitivity of channel 2,3 and 4:

LINE

is the top position,

PHONO is the bottom position.

DJ Cleanfeed

On the VCA-board mounted at the

back of the Main-board (front) the

Cleanfeed DJ jumpers are

situated. These jumpers control

the DJ signal to be filtered out of

the monitor ON, or not OFF:

CF-OFF is the right position(2x),

CF-ON is the left position (2x).

Limiter lock

At the back of the Main-board (front) under the VU-meter the limiter-lock option named "Lock" is

situated. The 2 pins "ON" control this option:

ON is linked,

OFF is open.

The front panel can now be closed gently and the 8 torx screws fastened.

Then the AC-cord can be connected to the mains.

Chan.2

Chan.3

Cleanfeed DJ

DATEQ XTC II manual

Chan.4

Phono/Line

Phantom