4qd HIB-DNO Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Computer Hardware 4qd HIB-DNO. 4qd HIB-DNO 3 pages. Hall throttle interface board

Print Page

DNO settings

The DNO gain adjustment will need to be turned fully clockwise to allow full speed

to be reached.

Calibration

The HIB-DNO should not require calibration when used with a 5V hall effect

throttle that draws around 10mA. If you wish to use a different throttle there is

a trimmer potentiometer that can be used to adjust the hall device current, this

can be accessed by cutting a small hole in the heat shrink tubing.

HIB-DNO V1.1 05/22

Page 3