AUSTRALIAN MADE GREAT MATE Installation And Setup Instructions - Page 5

Browse online or download pdf Installation And Setup Instructions for Engine AUSTRALIAN MADE GREAT MATE. AUSTRALIAN MADE GREAT MATE 20 pages. Double swing gate motor kit

Print Page

Internal Release

Plate Engaged

Remove the motor cover. Use two 13 mm spanners to loosen the manual release nut and bolt.

Push the DC motor away from the gears to disengage the motor and allow the gate drive arm

to move by hand.

Pull the DC motor back towards the gears to engage. Ensure the DC motor gear has meshed

with the drive gear. Fully tighten the Internal Release Bolt and check the gears are engaged.

Swing Arm

DOUBLE GATE

INSTALLATION AND SET UP

INSTRUCTIONS

Internal Manual Release

DC Motor

Internal Release

Bolt Engaged

External Manual Release

Drive Arm

Internal Release

Plate Disengaged

Swing Arm

Use a 19 mm spanner to undo the two bolts. Fold

the swing arm back and tie up to the bottom of

the gate. Screw the two bolts back into the Drive

Arm.

Internal Release

Bolt Disengaged

Drive Arm