Cookworks 423/7350 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Fryer Cookworks 423/7350. Cookworks 423/7350 7 pages. Stainless steel deep fryer

Print Page

Safety cut-out

This fryer is equipped with a safety cut-out to protect the appliance

from overheat such as not enough oil or fat or if blocks of solid fat

are being melted in the fryer.

Carry out the following steps when the safety cut-out has switched

off the appliance.

Let oil or fat cool down for 30 mins.

Press the reset button where located at the back of the

control panel.

Remove the lid, frying basket, fryer and all packaging material from the retail box.

Wash the fryer basket and cover in hot, soapy water. Wipe them dry thoroughly.

Wipe the inside of the bowl with a damp cloth and make sure it is completely dry before you fill

the fryer with oil or fat.

This fryer is equipped with a safety micro-switch at the control box. This is to ensure the control

box is fixed to the outer metal case in correct position before the unit can be started to use. Fix

the control box to the slot on the side of the outer metal case. Ensure the safety micro-switch is

pressed by the trigger on the outer metal case. The unit cannot be operated until the control box

is fixed to the outer case correctly. If it is not working, remove the control box and fix it again until

the micro-switch has been pressed by the trigger.

Micro-switch

Attach the basket handle to the basket by squeezing the

two handle wires together and inserting the ends

through the two eyelets in the basket.

Rotate the handle backwards until it locks securely in

the place. Ensure the handle is securely connected to

the basket before operating your fryer.

Ensure the Micro-switch

is activated by the trigger